Controls are the building blocks of a graphical user interface (GUI). Familiar controls include buttons, checkboxes, list boxes, and so forth. Controls can provide a means for a user to indicate a preference, enter data, or make selections.
There are five types of web controls (each but the first will be covered in detail in this and coming chapters). They are:
- HTML controls
The original controls available to any HTML page. These all work in ASP.NET exactly as they work in other web pages. HTML controls will be used where appropriate in this book, but will not be discussed in detail. For a good resource on HTML controls, see HTML: The Definitive Guide, Second Edition, by Chuck Musciano and Bill Kennedy (O’Reilly).
- HTML server controls
Based on original HTML controls, but enhanced to enable server-side processing.
- Web (ASP) server controls
Server-side controls providing the same functionality as HTML server controls but integrated into the ASP.NET programming model.
- Validation controls
Provide a full range of built-in form validation capability. Chapter 8 discusses validation controls.
- User controls and custom controls
Controls created by the developer. Chapter 14 discusses user and custom controls.
HTML server controls and ASP controls both offer significant improvements over the old-style HTML controls. These include:
The ability to automatically maintain state, discussed in detail in Chapter 6.
ASP.NET detects the level of the target browser. Uplevel DHTML browsers are sent script for client-side processing. On downlevel standard browsers, all processing is done on the server. The appropriate HTML is generated for each browser.
Use of a compiled language instead of interpreted script, resulting in better performance.
The ability to bind HTML server controls and ASP controls to a data source (as discussed in Chapter 9 ).
Normal HTML controls such as <h1>,
<a>, and <input>
are not processed by the server, but are sent directly to the browser
for display. Standard HTML controls can be exposed to the server and
made available for server-side processing by turning them
into HTML server controls. Server-side processing allows for data
binding, programmatic response to events, and the ability to use a
fully featured and compiled coding language rather than a scripting
language.
To convert an HTML control to an HTML server control, simply add the
attribute runat="server“. In addition, you will
probably want to add an id attribute, so that
contents of the control can be accessed and controlled
programmatically. For example, start with a simple input control:
<input type="text" size="40">
You can convert it to an HTML server control by adding the
id and runat attributes, as
follows:
<input type="text" id="BookTitle" size="40" runat="server">
There are several benefits to converting an HTML control to an HTML server control:
Once a control is converted to a server control, it can be referred to in code. For example, in Example 4-1 and Example 4-2 you can read or set the value of the text box by referring to lblBookName.Value or txtBookName.Value.
Server controls retain state during round trips to the server (more on this in Chapter 6).
Server controls generate events, which your code can then handle.
Server controls are aware of the client browser level and generate HTML appropriate to the target browser.
Example 4-1 and Example 4-2 demonstrate the use of HTML server controls in C# and VB.NET, respectively. In these listings, a text box is used to prompt the user to enter a book name. When the Button control is clicked, it fires an event that fills a second text box with the contents of the first text box and also changes its size.
Example 4-1. Code listing for csHTMLServerControls.aspx
<%@ Page Language="C#" %> <html> <script runat="server"> void btnBookName_Click(Object Source, EventArgs E) { lblBookName.Value = txtBookName.Value; lblBookName.Size = 80; } </script> <body> <form runat=server> <h1>HTML Server Controls</h1> <br/> <h2>The date and time is <% =DateTime.Now.ToString( ) %>.</h2> <br/> <h2>HTML Server Control</h2> Book Name: <input type="text" id="txtBookName" size="40" value="Enter book name." runat="server" /> <br/> <br/> <br/> <input type="submit" id="btnBookName" value="Book Name" onServerClick="btnBookName_Click" runat="server" /> <br/> <br/> <input type="text" id="lblBookName" size="40" runat="server" /> </form> </body> </html>
Example 4-2. Code listing for vbHTMLServerControls.aspx
<%@ Page Language="VB" %> <html> <script runat="server"> Sub btnBookName_Click(ByVal Sender as Object, _ ByVal e as EventArgs) lblBookName.Value = txtBookName.Value lblBookName.Size = 80 End Sub </script> <body> <form runat=server> <h1>HTML Server Controls</h1> <br/> <h2>The date and time is <% =DateTime.Now( ) %>.</h2> <br/> <h2>HTML Server Control</h2> Book Name: <input type=text id="txtBookName" size="40" value="Enter book name." runat="server" /> <br/> <br/> <br/> <input type="submit" id="btnBookName" value="Book Name" onServerClick="btnBookName_Click" runat="server" /> <br/> <br/> <input type="text" id="lblBookName" size="40" runat="server"/> </form> </body> </html>
Consider the very first line of code in both listings:
<%@ Page Language="C#" %> <%@ Page Language="VB" %>
This is a page
directive,
which tells the compiler that any script found in this page is
written using the C# or VB language, respectively. Immediately
following the opening <HTML> tag in Example 4-1 and Example 4-2 is a script
block, written in C# or VB.NET, respectively, as indicated by the
page directive. It contains a routine called
btnBookName_Click,
which is the event handler for the Click event of the btnBookName
button. This method takes two parameters and returns nothing (as
indicated by the void keyword in C# and the
Sub keyword in VB.NET). These parameters are
typical for all event handler methods in ASP.NET, as discussed in
Chapter 3. In C#, the parameter list is of the
form:
(Object Source, EventArgs E)In VB.NET, the parameter list is of the form:
(ByVal Sender as Object, ByVal e as EventArgs)Note that within the body of the routine, the HTML server controls
are referred to by their id attribute, for example
lblBookName and txtBookName.
The Submit button is shown here:
<input type="submit"This is prototypical of converting HTML controls to server controls.
It has an id
attribute and the
runat attribute:
id="btnBookName" runat="server"
Rather than the traditional onClick attribute used
in conventional HTML or ASP pages, the Submit button has an
onServerClick attribute, telling the server what
function to call when the Click event occurs:
onServerClick="btnBookName_Click"Tip
If you want the control to handle the event on the client side, you
should use the onClick attribute. In this case,
you must provide client-side scripting to handle the event. You
cannot have both an onClick and
onServerClick attribute for the same control.
Figure 4-1 shows the page that results from running the code in either Example 4-1 or Example 4-2, filling in a book name, and clicking the Book Name button.
Example 4-3 and Example 4-4 show both input controls and HTML server container controls in C# and VB.NET, respectively, and demonstrate the use of the InnerHtml property.
Example 4-3. Input and container HTML server controls using C#, csHTMLServerControls2.aspx
<%@ Page Language="C#" %>
<script runat="server">
void Page_Load(Object Source, EventArgs E)
{
string strHtml = "";
strHtml += txtName.Value + "<br/>";
strHtml += txtStreet.Value + "<br/>";
strHtml += txtCity.Value + ", " + txtState.Value;
tdInnerHtml.InnerHtml = strHtml;
}
</script>
<html>
<body>
<form runat="server">
<h1>HTML Server Controls</h1>
<h2>InnerHTML</h2>
<table>
<tr>
<td>Name:</td>
<td>
<input type="text"
id="txtName"
runat="server"/>
</td>
</tr>
<tr>
<td>Street:</td>
<td>
<input type="text"
id="txtStreet"
runat="server"/>
</td>
</tr>
<tr>
<td>City:</td>
<td>
<input type="text"
id="txtCity"
runat="server"/>
</td>
</tr>
<tr>
<td>State:</td>
<td>
<input type="text"
id="txtState"
runat="server"/>
</td>
</tr>
<tr>
<td></td>
<td id="tdInnerHtml" runat="server" />
</tr>
</table>
<input type="submit" value="Do It!">
</form>
</body>
</html>Example 4-4. Input and container HTML server controls using VB.NET, vbHTMLServerControls2.aspx
<%@ Page Language="VB" %>
<script runat="server">
sub Page_Load(ByVal Sender as Object, _
ByVal e as EventArgs)
dim strHtml as string
strHtml = txtName.Value & "<br/>"
strHtml = strHtml & txtStreet.Value & "<br/>"
strHtml = strHtml & txtCity.Value & ", " & txtState.Value
tdInnerHtml.InnerHtml = strHtml
end sub
</script>
<html>
<body>
<form runat="server">
<h1>HTML Server Controls</h1>
<h2>InnerHTML</h2>
<table>
<tr>
<td>Name:</td>
<td>
<input type="text"
id="txtName"
runat="server"/>
</td>
</tr>
<tr>
<td>Street:</td>
<td>
<input type="text"
id="txtStreet"
runat="server"/>
</td>
</tr>
<tr>
<td>City:</td>
<td>
<input type="text"
id="txtCity"
runat="server"/>
</td>
</tr>
<tr>
<td>State:</td>
<td>
<input type="text"
id="txtState"
runat="server"/>
</td>
</tr>
<tr>
<td></td>
<td id="tdInnerHtml" runat="server" />
</tr>
</table>
<input type="submit" value="Do It!">
</form>
</body>
</html>In Example 4-3 and Example 4-4, the
two types of
input
controls are text fields and a button. Both happen to use the
<input> HTML tag, although as you can see in
Table 4-1, there are other input controls that do
not use those tags.
Table 4-1. HTML tags and their categories
The table, which is a container control, is used in these examples
primarily as a means of controlling the layout of the other controls
on the page. It has not been converted to an HTML server control,
since it does not have the runat="server"
attribute. One of the cells, however, has been converted for
server-side processing by the inclusion of that attribute. In
addition, that cell has an id attribute so that it
can be referred to programmatically in the
Page_Load routine.
Looking at the Page_Load routine, which is executed every time the
page is posted, (that is, every time the Do It! button is clicked),
an HTML string is constructed containing the values of the input text
fields, interspersed with some HTML to control line breaks. This
string is then assigned to the InnerHtml property of the table cell
with the tdInnerHtml
id
attribute:
tdInnerHtml.InnerHtml = strHtml
If the InnerText property is used instead of
the InnerHtml property, then the
resulting page would display the actual < and
> symbols. As written, however, the resulting
page will look something like Figure 4-2, after
values are entered in the text fields and the button is clicked.
Table 4-1 lists HTML tags and the category to which they belong.
Tip
You never actually use the name of HTML server controls shown in Table 4-1 in any of your code. What goes in your HTML
code is the HTML tag with the addition of the
runat="server" attribute and usually with the
addition of an id attribute.
Actually, any HTML control can be converted to server-side processing
with the addition of the runat="server" attribute.
If the control is not listed in Table 4-1, then it
will be treated as an HtmlGenericControl. As with any other container
control, this allows programmatic access to the
control’s inner HTML.
All the HTML server controls derive from the System.Web.UI.Control class and are contained in the System.Web.UI.HTMLControls namespace. Figure 4-3 shows the HTML server control hierarchy.
Get Programming ASP.NET, Second Edition now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
