ACTIVE TONE CONTROL
Figure 18.5 illustrates an active tone control circuit which employs a frequency-dependent feedback network between the collector and base of the transistor. For input voltages less than 250 mV the total distortion remains below 0.1%, rising to 0.85% for an output voltage of 2 V at 12,500 Hz. The input and output impedances at 1 kHz are 40 kΩ and 180 Ω respectively.
Fig. 18.5 Active tone control circuit
The range of control extends from –22 to +19 dB at 30 Hz, and from –19 to +19.5 dB at 20 kHz. The flat frequency response is obtained when the variable resistors are in the physically central position. The voltage gain ...
Get Consumer Electronics now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
