NG-RAN and 5G-NR

Book description

NG-RAN and 5G-NR describes the deployment of 5G NSA (non standalone 5G) and 5G-SA (standalone 5G). 5G-NSA deals with radio access entities. For the 5G-NSA mode, dual MR DC connectivity is based on radio measurements, allowing the master 4G base station MeNB to add or remove a secondary 5G node SgNB.

This book describes the architecture of the NG radio access network and the 5G-NR radio interface according to the 3GPP (3rd Generation Partnership Project) specifications. The overall architecture of the NG-RAN, including the NG, Xn and F1 interfaces and their interaction with the radio interface, are also described. The 5G-NR physical layer is mainly connected by implementing antennas, which improves transmission capacity. 5G-SA deals with the 5G Core network.

In the 5G-SA model, the mobile is attached to the 5G Core network through NG-RAN. The book explains radio procedure, from switching on a device to establishing a data connection, and how this connection is maintained even if mobility is involved for both 5G-SA and 5G-NSA deployment. NG-RAN and 5G-NR is devoted to the radio access network, but mobile registration, establishment procedures and re-establishment procedures are also explained.

Table of contents

  1. Cover
  2. Title Page
  3. Copyright
  4. Preface
  5. 1 NG-RAN Network – Functional Architecture
    1. 1.1. Functional architecture NSA/SA
    2. 1.2. Description of the NG-RAN network
    3. 1.3. Functional separation between the NG-RAN radio interface and the 5G core network
    4. 1.4. Scheduling and QoS
    5. 1.5. Security architecture
    6. 1.6. Network slicing
    7. 1.7. References
  6. 2 NG-RAN Network – Protocol Architecture
    1. 2.1. The protocol architecture of the radio interface
    2. 2.2. Procedures on the radio network access
    3. 2.3. Identities of the XnAP and NG-AP application protocols
    4. 2.4. References
  7. 3 NG-RAN Network – Procedures
    1. 3.1. General procedure of the 5G-NSA mode
    2. 3.2. General procedures of the 5G-SA
    3. 3.3. References
  8. 4 5G-NR Radio Interface – The Physical Layer
    1. 4.1. 5G-NR radio interface
    2. 4.2. TDD mode configurations
    3. 4.3. Physical resource
    4. 4.4. Physical channels and physical signals
    5. 4.5. Downlink transmission
    6. 4.6. Transmission in uplink
    7. 4.7. References
  9. 5 5G-NR Radio Interface – Operations on the Frequency Bands
    1. 5.1. Operations on the frequency bands
    2. 5.2. Carrier aggregation
    3. 5.3. Supplementary UpLink (SUL)
    4. 5.4. Synchronization on the secondary cell
    5. 5.5. References
  10. 6 5G-NR Radio Interface – MIMO and Beamforming
    1. 6.1. Multiplexing techniques
    2. 6.2. Antenna port
    3. 6.3. Uplink Control Information (UCI)
    4. 6.4. PDSCH transmission
    5. 6.5. PUSCH transmission
    6. 6.6. Beamforming management
    7. 6.7. References
  11. 7 5G-NR Radio Interface – Bandwidth Part
    1. 7.1. Bandwidth part
    2. 7.2. CORESET
    3. 7.3. BWP switching procedure
    4. 7.4. References
  12. 8 5G-NR Radio Interface – Data Link Layer
    1. 8.1. SDAP protocol
    2. 8.2. PDCP
    3. 8.3. RLC protocol
    4. 8.4. MAC protocol
    5. 8.5. References
  13. 9 5G-NR Radio Interface – Radio Access Procedure
    1. 9.1. System information
    2. 9.2. Connection management
    3. 9.3. Measurement configuration
    4. 9.4. References
  14. Index
  15. End User License Agreement

Product information

  • Title: NG-RAN and 5G-NR
  • Author(s): Frederic Launay
  • Release date: August 2021
  • Publisher(s): Wiley-ISTE
  • ISBN: 9781786306289