CCIE Routing and Switching Practice Labs

Section 4: EGP Protocols (25 Points)

• Configure BGP as shown in Figure 3-14 with the following peering:

  R2 172.16.0.1 – R3 172.16.0.2

  R2 172.16.0.1 – R1 10.80.80.1

  R1 10.80.80.1 – R8 10.8.8.8

  R1 10.80.80.1 – R6 10.6.6.6

  R6 10.6.6.6 – R4 10.4.4.4

  R6 10.6.6.6 – R5 10.5.5.5

  R6 10.6.6.6 – R7 10.7.7.7

  Where possible, minimize the configuration required.

  Figure 3-14. IP EGP Diagram

  [View full size image]

  

• Inject the following networks into BGP, configure new loopback interfaces where required, do not use the network command, and ensure that all routes have a metric of 100 assigned to them:

  R1 – 10.1.1.1/28

  R2 – 2.2.2.2/28

  R3 – 3.3.3.3/28

  R4 – 10.4.4.4/28

  R5 – 10.5.5.5/28 ...