CCIE Routing and Switching Practice Labs

Section 2: IP IGP Protocols (16 Points)

Configure the IP routing as in Figure 3-13 as directed.

Figure 3-13. IP IGP Diagram

[View full size image]

Section 2.1: EIGRP (7 Points)

• Configure EIGRP AS1 as shown in Figure 3-13. Initial loopback interfaces should be advertised within EIGRP for every router running EIGRP.

• Authenticate routing updates.

• Allow R3 to only receive routing updates from R2 even if a further EIGRP router is added to VLAN1.

Section 2.2: OSPF (5 Points)

• Configure OSPF as shown in Figure 3-13 with the process on each router as 1. Ensure that all OSPF routers have their loopback interfaces advertised in the same area as that of the ...