Section 4: EGP Protocols (17 Points)

  • Configure BGP, as shown in Figure 1-14, with the following peering: R3–R2, R8–R2, R6–R2, R6–R8, R7–R8, R6–R5. Ensure the most suitable interfaces are used to maintain resilience for BGP peering (except for R2 and R3, use 172.16.0.0/16 addresses for all peering to and from these routers).

    Figure 1-14. IP EGP Diagram
    [View full size image]

  • Ensure minimal configuration on R8.

  • Inject the following networks into BGP via new loopback interfaces:

    R3: 20.200.200.1/24 and 20.20.20.1/24

    R5: 20.20.20.1/24 and 200.20.20.1/24

    R7: 30.30.30.30/29

  • Ensure that R6 BGP routing table prefers to use AS1000 for network 20.20.20.0/24; do ...

Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial