O'Reilly Hacks
oreilly.comO'Reilly NetworkSafari BookshelfConferences Sign In/My Account | View Cart   
Book List Learning Lab PDFs O'Reilly Gear Newsletters Press Room Jobs  



The NoCat Night Light
How many cats does it take to screw in a light bulb?

Contributed by:
Rob Flickenger
[05/10/03 | Discuss (78) | Link to this hack]

Back in March 2003, some friends and I were hanging out at a really good coffee shop in Sebastopol. This particular coffee joint is housed in an old wooden train station building, with very high ceilings, old style hanging industrial lamps, and even a couple of old trains serving as small shops, still on the tracks.

Unfortunately, there's no wireless available at this shop (there was, once upon a time, back when O'Reilly was located across the street from it. But that was ages ago, and even then the signal wasn't all that it could have been.) As we sat around drinking our high octane beverages, we got to talking about the best way to provide coverage in such a huge space. The room we were in was a common room, open at all hours (the front enterance is huge, and doesn't even have a door.) While you could put an access point in one of the enclosed shops in the building, coverage in the open area would likely be spotty at best. You would want the AP to be located high up off the ground, where everyone could see it.

Almost simultaneously, we all looked up and noticed the lamps hanging from the wooden rafters. What if you could house an AP in a package the size of a large lightbulb, and install it in an existing light socket? This seemed like a good idea, but how would you get network access to it without running CAT5 to the socket? Easy: Powerline Ethernet.

With the recent release of the Siemens' SpeedStream series, such an insane, caffeine-induced idea as an AP in a lightbulb might be a possibility. These devices are quite small, about the size of a standard wall wart. They sport a CF wireless adapter that acts as the AP (actually, it's the same card as the popular Linksys WCF11 but with a different sticker.) The brilliant bit is that the wireless network bridges directly to the AC power, so a standard Powerline Ethernet adapter anywhere on the same power circuit can provide Internet access to as many APs as you care to plug in. At a mere $85 retail, we couldn't resist picking one up and seeing what we could do with it.

One of our first concerns was practical rather than technical. Obviously, if you're going to replace a light bulb with an access point, the room will likely get darker. That is, unless the AP can also provide light as well. After fooling with a couple of lighting ideas, we finally soldered some copper romex onto a fluorescent bulb as a prototype. The romex is rigid enough to hold the lamp steady, and easy to solder to. The fluorescent bulb would obviously be dimmer than a 300 watt spot lamp, but it would be better than nothing. And as a flourescent runs much cooler, it probably wouldn't turn the guts of the access point to liquid. This solved the light issue well enough for the moment, but how could we connect the whole thing to a standard light bulb socket?

One trip to the hardware store later, we had a variety of Edison plugs, sockets, and adapters. We settled on a simple extender type of device, with a female socket on one side and a male plug on the other. Again, the contacts were copper, making it easy to solder on more romex. We had the basic design together, but what could we possibly use as a housing?

Tupperware, of course. Adam painted the inside of a tupperware bowl white, and the entire device just managed to squeeze inside. We first attempted to take the SpeedStream unit apart to save space, but it's already tightly packed inside (much of the unit is occupied by a large transformer.) Besides, keeping the original enclosure made us all feel a bit more relaxed about plugging the thing in. The Edison plug poked through the bottom of the bowl, where we simply screwed on another one to keep it tightly attached.

So with all of the technical considerations accounted for, all that was left was the all-important marketing phase of the project. Some electrical tape and one nylon sticker later, the NoCat Night Light was born!

But how well would it actually work? Wouldn't the fluorescent throw off all sorts of noise that would interfere with the AP? We certainly thought so. Unfortunately, we didn't have a machine handy with which to do real throughput testing, but DSL reports showed a very respectable 2Mbps or so. This was well above the rated capacity of the cable modem network we were using, so we were definitely satisfied with the results.

One big improvement to the design would be to replace the fluorescent bulb with a bright LED array, or even a simple socket so you could use whatever (low temperature) light source you like. This design makes much more sense than Siemen's original, as it gets the AP up off of the ground and above your head, where presumably many more people can see it. Adding more APs is as simple as screwing in a light bulb, as they bridge directly to the same AC powerline segment, and terminate at the same ethernet.

While we have no current plans to actually produce the Night Light commercially, we certainly hope that someone will take the hint and mass-produce these things. Anything to help the cause of Infinite Bandwidth Everywhere for Free...


O'Reilly Home | Privacy Policy

© 2007 O'Reilly Media, Inc.
Website: | Customer Service: | Book issues:

All trademarks and registered trademarks appearing on oreilly.com are the property of their respective owners.